PowerLogic PM8000 - PM8244 DIN rail mount Meter + Remote display - int. Metering.
Specifications |
Range of product | PowerLogic PM8000 |
Country of Origin (Estimated) | Canada |
Warranty | 12 months |
CO/CQ | Yes (if) |
Product name & Device short name | PM8244 |
Product or component type | Power meter |
Power quality analysis | Conforming to EN 50160: 2010 compliance report conforming to IEEE 519: 2014 compliance report conforming to IEC 61000-4-30: class S power quality measurement up to the 63rd harmonic harmonic distortion waveform capture voltage sag and swell detection programmablity (logic and math functions) conforming to IEC 62586 power quality monitoring disturbance direction detection rapid voltage change |
Device application | WAGES metering Power monitoring |
Type of measurement | Current Voltage Frequency Active and reactive power total Apparent power total Power factor total Active and reactive power per phase, rms Apparent power per phase, rms Power factor per phase, rms |
Supply voltage | 90...415 V AC 45...65 Hz +/- 10 % 110...415 V DC +/- 10 % |
[In] rated current | 1 A 5 A 10 A |
Type of network | 3P + N 1P + N 3P |
Display type | Remote LCD display |
Display resolution | 320 x 240 pixels QVGA |
Measurement current | 50…10000 mA |
Analogue input type | Voltage (impedance 5 MOhm) Current (impedance 0.3 mOhm) |
Measurement voltage | 57…400 V AC 42...69 Hz between phase and neutral 100…690 V AC 42...69 Hz between phases |
Accuracy class | Class 0.2S active energy conforming to IEC 62053-22 Class 0.2 active energy conforming to ANSI C12.20 Class 0.2 active power conforming to IEC 61557-12 Class 0.5S reactive energy conforming to IEC 62053-24 Class 0.5 power factor conforming to IEC 61557-12 Class 0.2 voltage conforming to IEC 61557-12 Class 0.2 current conforming to IEC 61557-12 |
Number of inputs | 3 digital 30 V AC 3 digital 60 V DC |
Number of outputs | 1 pulse |
Information displayed | Voltage Current Frequency Power Energy consumption Harmonic distortion |
Communication port protocol | Modbus RTU at 115 kbauds - 2-wire ION at 115 kbauds - 2-wire DNP3 IEC 61850 Modbus TCP/IP Ethernet Modbus TCP/IP daisy chain at 10/100 Mbit/s RSTP 801.1d 2004 |
Communication port support | ETHERNET Screw terminal block: RS485 |
Data recording | Sequence of event recording Event logs Min/max of instantaneous values Harmonics logs Alarm logs GPS synchronisation Waveform logs Data logs Time stamping Trending/forecasting Sag and swell logs 50 data recorders |
Memory capacity | 512 MB |
Connections - terminals | Voltage circuit: screw terminal block4 Control circuit: screw terminal block2 Current transformer: screw terminal block6 RS485 link: screw terminal block4 Digital input: screw terminal block8 Digital output: screw terminal block4 Ethernet network: RJ45 connector2 |
Material | Polycarbonate |
Dimensions (mm) (H x W x D) | 96x96x90.8mm |
Cut-out dimensions | 92 x 92 mm |
Net weight | 528 g |